Today, artificial nails are very popular among girls and women, and the gel is the most popular material for their modeling. To grow nails on your own is extremely difficult, but to remove them if necessary (if, for example, you do not have free time for a trip to the manicure room) it is quite possible and at home, Remember some simple rules of this procedure.
Just “rip off” artificial nails cannot in any case. If you do not properly remove them, you can damage very real nails, because the gel will never go away, not “capturing” the top layer of your nails, because of what they become uneven, brittle and dull.
Remove the gel from the nails is quite difficult. Neither Acetone nor special professional liquid (Acrylic Remover) can neither soften it , nor dissolve it. Therefore, there is only one possible way – to cut gel nails. But this should be done with great care, since the border between the accreted and natural nail is almost invisible even for a specialist, and the risk of damaging the nail plate is great.
If you decide to remove the gel from the nails at home , then do not use a glass or metal with a notch (from the usual set for manicure), a nail file, and also europempus. The saw should be chosen with an abrasiveness equal to 100-150 grit. Such a tool is rather rigid and is intended for artificial materials. With this nail file, you can layer the gel from the nail surface layer by layer.
While removing the gel, a small problem may arise before you: because of the appearance of the nail dust, it will be difficult for you to notice where the natural nail begins. To avoid this, periodically need to brush the dust with a brush and wipe the nail plate with a piece of cotton wool or cotton swab dipped in a liquid to remove varnish. So you can clearly see the border, because the gels and natural nails will get wet differently.
If you can not cut all the gel, you can leave a small amount on the nails . It’s much better than damaging your own nails. At the end of the procedure, it is necessary to grind and polish them. Then lubricate the surface with a special cuticle oil and apply a strengthening base.